View PC1602LRS-FWA-B-Q_7863948.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

tech. corp. specifications customer : sample code (ver.) : PC1602LRS-FWA-B-Q (rev.0) mass production code (ver.) drawing no. (ver.) : pc-95003 customer approved date: approved qc confirmed designer approval for specifications only. * this specification is subject to change without notice. please contact powertip or it?s representative befo re designing your product based on this specification. approval for specifications and sample. powertip tech. corp. headquarters: no.8, 6 th road, taichung industrial park, taichung, taiwan ? 407 I^ 8 ? tel: 886-4-2355-8168 fax: 886-4-2355-8166 e-mail: sales@powertip.com.tw http://www.powertip.com.tw no.pt-a-005-7 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page2 records of revision date rev. description note page 2005/10/28 0 PC1602LRS-FWA-B-Qis the rohs compliant part number based on powertip's standard pc1602lrs-fwa-b total 23 page free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page3 contents 1. specifications 1.1 features 1.2 mechanical specifications 1.3 absolute maximum ratings 1.4 dc electrical characteristics 1.5 optical characteristics 1.6 backlight characteristics 2. module structure 2.1 counter drawing 2.2 interface pin description 2.3 timing characteristics 2.4 display command 2.5 character pattern 3. quality assurance system 3.1 quality assurance flow chart 3.2 inspection specification 4. reliability test 4.1 reliability test condition 5. precaution relating product handling 5.1 safety 5.2 handling 5.3 storage 5.4 terms of warranty note for detailed information please refer to ic data sheet st7066u,ks0065b free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page4 1. specifications 1.1 features item standard value display type 16*2 characters lcd type stn gray positive transflective normal temp. driver condition lcd module 1/16 duty 1/5 bias viewing direction 6 o?clock backlight yg led b/l weight 36 g interface rohs this product conforms the rohs of ptc detail information please refer web side : http://www.powertip.com.tw/news/latestnews.asp 1.2 mechanical specifications item standard value unit outline dimension 84.0(l) * 44.0(w) * 13.7(h)(max) mm viewing area 61.0(l) * 15.8(w) mm active area 56.21(l) * 11.5(w) mm dot size 0.56(l) * 0.66(w) mm dot pitch 0.60 (l) * 0.70(w) mm note for detailed information please refer to lcm drawing 1.3 absolute maximum ratings item symbol condition min. max. unit power supply voltage v dd -0.3 7.0 v lcd driver supply voltage v lcd v dd -10.0 v dd +0.3 v input voltage v in -0.3 v dd +0.3 v operating temperature t op excluded b/l 0 50 storage temperature t st excluded b/l -20 70 storage humidity h d ta 40 - 90 %rh free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page5 1.4 dc electrical characteristics v dd = 5.0 v 0.5v v ss = 0v ta = 25 item symbol condition min. typ. max. unit logic supply voltage v dd 4.5 5.0 5.5 v ?h? input voltage v ih 0.7 v dd - v dd v ?l? input voltage v il -0.3 - 0.6 v ?h? output voltage v oh i oh =-0.1ma 3.9 - v dd v ?l? output voltage v ol i ol =0.1ma - - 0.4 v supply current i dd v dd = 5.0 v - 1.5 3.0 ma 0 - - - 25 *1 4.3 4.5 4.7 lcm driver voltage v op 50 - - - v note: *1. the v op test point is v dd - v o . 1.5 optical characteristics lcd panel 1/16 duty 1/4 bias v lcd =4.2 v ta = 25 item symbol conditions min. typ. max. reference view angle c> 2.0, ? = 0 40 - - notes 1 & 2 contrast ratio c = 5 , ? = 0 5 7 - note 3 response time(rise) tr = 5 , ? = 0 - 150 ms - note 4 response time(fall) tf = 5 , ? = 0 - 300 ms - note 4 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page6 light (when reflected) z ( =0 ) note 1: definition of angles and ? note 2: definition of viewing angles 1 and 2 1 2 viewing angle ( ? fixed) note : optimum viewing angle with the naked eye and viewing angle at cmax. above are not always the same note 3: definition of contrast c note 4: definition of response time brightness (reflection) of unselected dot (b2) c = ?????????????????? brightness (reflection) of selected dot (b1) contrast non-selected state v lcd -v lcd 0 t f 90% t r 10% selected state non-selected state time 0 note: measured with a transmissive lcd operating voltage (v) panel which is displayed 1 cm 2 v lcd : operating voltage f frm : frame frequency t r : response time (rise) t f : response time (fall) (%) brightness (reflection) brightness (reflection) o f selected dot brightness (reflection) of unselected dot cmax. contrast c 2.0 sensor lcd panel x( ? =90 ) light (when transmitted ) x? z? y( ? =0 ) ( =90 ) ? y?( ? =180 ) b2 b1 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page7 1.6 backlight characteristics lcd module with led backlight maximum ratings item symbol conditions min. max. unit forward current if ta =25 - 300 ma reverse voltage vr ta =25 - 8 v power dissipation po ta =25 - 1.38 w electrical / optical characteristics ta =25 item symbol conditions min. typ. max. unit forward voltage vf if= 120 ma - 4.2 4.6 v reverse current ir vr= 8 v - - 0.2 ma wavelength p if= 120 ma 571 - 576 nm luminous intensity (without lcd) i v i f =120 ma 160 210 250 cd/m 2 color yellow-green free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page8 2. module structure 2.1 counter drawing free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page9 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page10 2.2 interface pin description pin no. symbol signal description 1 v ss power supply (vss=0) 2 v dd power supply (v dd >v ss ) 3 v o operating voltage for lcd 4 rs register selection input high = data register low = instruction register (for write) busy flag address counter (for read) 5 r/w read/write signal input is used to select the read/write mode high = read mode, low = write mode 6 e start enable signal to read or write the data 7~10 db0 ~ db3 four low order bi-directional three-state data bus lines. use for data transfer between the mpu and the lcd module. these four are not used during 4-bit operation. 11~14 db4~db7 four high order bi-directional three-state data bus lines. used for data transfer between the mpu and the lcd module. db7 can be used as a busy flag. 15 a power supply for led b/l (+) 16 k power supply for led b/l (-) contrast adjust lcd module v dd 2 3 1 10~20k v o v ss 4.2v 15 16 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page11 2.3 timing characteristics ? writing data from mpu to st7066u v ih1 v il1 t as t ah t ah t pw t h valid data t c db0-db7 e r/w rs t dsw t r reading data from st7066u to mpu rs r/w e db0-db7 t c t ddr valid data t h t pw t ah t ah t r t as v il1 v ih1 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page12 ? write mode (writing data from mpu to st7066u) (v cc = +5v,ta=25 c) symbol characteristics test condition min. typ. max. unit t c enable cycle time pin e 1200 - - ns t pw enable pulse width pin e 140 - - ns t r , t f enable rise / fall time pin e - - 25 ns t as address setup time pins: rs , rw,e 0 - - ns t ah address hold time pins :rs,rw,e 10 - - ns t dsw data setup time pins:db0~db7 40 - - ns t h data hold time pins:db0~db7 10 - - ns ? read mode (reading data from st7066u to mpu) (v cc = +5v,ta=25 c) symbol characteristics test condition min. typ. max. unit t c enable cycle time pin e 1200 - - ns t pw enable pulse width pin e 140 - - ns t r , t f enable rise / fall time pin e - - 25 ns t as address setup time pins: rs , rw,e 0 - - ns t ah address hold time pins :rs,rw,e 10 - - ns t ddr data setup time pins:db0~db7 - - 100 ns t h data hold time pins:db0~db7 10 - - ns free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page13 2.4 display command instruction code instructions rs r/w db 7 db 6 db 5 db 4 db 3 db 2 db 1 db 0 description description time (270khz) clear display 0 0 0 0 0 0 0 0 0 1 write "20h" to ddram. and set ddram address to "00h" from ac. 1.52ms return home 0 0 0 0 0 0 0 0 1 set ddram address to "00h" from ac and return cursor to it's original position if shifted. the contents of ddram are not changed. 1.52ms entry mode set 0 0 0 0 0 0 0 1 i/d s sets cursor move direction and specifies display shift. these operations are performed during data write and read . 37 s display on/off 0 0 0 0 0 0 1 d c b d=1 : entire display on c=1 : cursor on b=1 : cursor position on 37 s cursor or display shift 0 0 0 0 0 1 s/c r/l set cursor moving and display shift control bit, and the direction, without changing of ddram data. 37 s function set 0 0 0 0 1 dl n f dl: interface data is 8/4 bits nl: number of line is 2/1 f: font size is 511/58 37 s set cgram address 0 0 0 1 ac 5 ac 4 ac 3 ac 2 ac 1 ac 0 set cgram address in address counter. 37 s set ddram address 0 0 1 ac 6 ac 5 ac 4 ac 3 ac 2 ac 1 ac 0 set ddram address in address counter. 37 s free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page14 read busy flag and address 0 1 bf ac 6 ac 5 ac 4 ac 3 ac 2 ac 1 ac 0 whether during internal operation or not can be known by reading bf. the contents of address counter can also be read. 0 s write data to ram 1 0 d7 d6 d5 d4 d3 d2 d1 d0 write data into internal ram (ddram/cgram). 37 s read data from ram 1 1 d7 d6 d5 d4 d3 d2 d1 d0 read data from internal ram (ddram/cgram). 37 s note: be sure the st7066u is not in the busy state (bf=0) before sending an instruction from the mpu to the st7066. if an instruction is sent without checking the busy flag , the time between the first instruction and next instruction will take much longer than the instruction time itself. refer to instruction table for the list of each instruction execution time . free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page15 2.5 character pattern free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page16 3. quality assurance system 3.1 quality assurance flow chart item customer sales r&d q.a manufactur ing product control purchase inventory control marketing & design sample approval pilot run & mass product ship out ok request info survey inquiry project evaluation project validatio n quote ok n g contract design chec k sample test verification sam p le a pp roval n g n g pilot run & reliabilit y test verification s p ecification p re p aration ok mass p roduction ins p ection n g ok shi p ment n g shi p ou t ok free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page17 item customer sales r&d q.a manufactu ring product control purchase inventory control sales service q.a activity 1. iso 9001 maintenance activities 2. process improvement proposal 3. equipment calibration 4. education and training activities 5. standardization management info clai m failure anal y sis corrective action trackin g anal y sis re p ort free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page18 3.2 inspection specification inspection standard : mil-std-105e table normal inspection single sampling level . equipment : gauge mil-std powertip tester sample defect level : major defect aql 0.4; minor defect aql 1.5 . out going defect level : sampling . manner of appearance test : (1). the test be under 40w2 fluorescent light ? and distance of view must be at 30 cm. (2). the test direction is base on about around 45 of vertical line. (fig. 1) (3). definition of area . (fig. 2) specification: no item criterion level 1.1 the part number is inconsistent with work order of production. major 1.2 mixed production types. major 01 product condition 1.3 assembled in inverse direction. major 02 quantity 2.1 the quantity is inconsistent with work order of production. major 03 outline dimension 3.1 product dimension and structure must conform to structure diagram. major 4.1 missing line character dot and icon. major 4.2 no function or no display. major 4.3 output data is error. major 4.4 lcd viewing angle defect. major 04 electrical testing 4.5 current consumption exceeds product specifications. major 05 black or white dot scratch contamination round type 5.1 round type: 5.1.1 display only : ? white and black spots on display Q 0.25mm, no more than four white or black spots present. ? densely spaced : no more than two spots or lines within 3mm minor free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page19 specification : no item criterion level 05 black or white dot scratch contamination round type =(x+y)/2 5.1.2 nom-display : dimension (diameter : ) acceptance(q?ty) ?Q0.10mm accept no dense 0.10mm ?Q0.20mm 3 0.20mm ?Q0.25mm 2 total 4 5.1.3 line type: dimension (diameter : ) acceptance (q?ty) length width a area b area --- w Q0.03mm accept no dense don?t count l Q3.0mm 0.03mm ?Q0.05mm don?t count l Q2.5mm 0.05mm ?Q0.075mm 4 don?t count --- w 0.075mm as round type minor 06 polarizer bubble acceptance(q?ty) dimension (diameter : ) a area b area ?Q0.20mm accept no dense don?t count 0.20mm ?Q0.50mm 3 don?t count 0.50mm ?Q1.00mm 2 don?t count ?1.00mm 0 don?t count total quantity 4 don?t count minor 07 the crack of glass glass crack: 7.1 crack on the circuit of electrode terminal : x y z front x Q1/5 a y Q 1/2 d z Q t back neglect minor free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page20 specification : no item criterion level glass crack: 7.2 general glass crack and corner edge: 7.2.1 x y z neglect out a area neglect x y z neglect out a area neglect minor 07 the crack of glass x: the length of crack y: the width of crack z: the thickness of crack d: terminal length t: the thickness of glass a : the length of glass 7.3 glass remain: x y neglect Q 1/3 d minor free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page21 specification : no item criterion level 07 the crack of glass x: the length of crack y: the width of crack z: the thickness of crack d: terminal length t: the thickness of glass a : the length of glass 7.4 corner crack and medial crack: x y z Q 1/5a crack can?t enter viewing area Q 1/2t Q 1/5a crack can?t exceed the half of width of sp width of sp 1/2t PC1602LRS-FWA-B-Q rev.0(dk) page22 4. reliability test 4.1 reliability test condition no. test item test condition 1 high temperature storage test keep in 70 2 96 hrs surrounding temperature, then storage at normal condition 4hrs 2 low temperature storage test keep in -20 2 96 hrs surrounding temperature, then storage at normal condition 4hrs 3 high humidity storage keep in +60 /90%rh duration for 96 hrs surrounding temperature, then storage at normal condition 4hrs (excluding the polarizer)or keep in +40 /90%rh duration for 96 hrs surrounding temperature, then storage at normal condition 4hrs 4 vibration test 1. sine wave 10 55hz frequency (1 min) 2. the amplitude of vibration :1.5 mm 3. each direction (xyz) duration for 2 hrs air discharge: apply 6 kv with 5 times discharge foreach polarity +/- contact discharge: apply 250v with 5 times discharge foreach polarity +/- 5 esd test 1. temperature ambinace:15 35 2. humidity relative:30% 60% 3. energy storage capacitance(cs+cd):150pf 10% 4. discharge resistance(rd):330 ? 10% 5. discharge, mode of operation: single discharge (time between successive discharges at least 1 s) (tolerance lf the output voltage indication: 5%) 6 temperature cycling test -20 25 70 25 (30mins) (5mins) (30mins) (5mins) 10 cycle surrounding temperature, then storage at normal condition 4hrs 7 vibration test (packaged) 1. sine wave 10 55hz frequency (1 min) 2. the amplitude of vibration :1.5 mm 3. each direction (xyz) duration for 2 hrs 8 drop test (packaged) drop direction : 3 comer /1 edges /6 sides etch 1times packing weight (kg) drop height (cm) 0 ~ 45.4 122 45.4 ~ 90.8 76 90.8 ~ 454 61 over 454 46 free datasheet http:///
PC1602LRS-FWA-B-Q rev.0(dk) page23 5. precaution relating product handling 5.1 safety 5.1.1 if the lcd panel breaks , be careful not to get the liquid crystal to touch your skin. 5.1.2 if the liquid crystal touches your sk in or clothes , please wash it off immediately by using soap and water. 5.2 handling 5.2.1 avoid any strong mechanical shock which can break the glass. 5.2.2 avoid static electricity which can damage the cmos lsi?when working with the module , be sure to ground your body and any electrical equipment you may be using. 5.2.3 do not remove the panel or frame from the module. 5.2.4 the polarizing plate of the display is very fragile. so , please handle it very carefully ,do not touch , push or rub the exposed polarizing with anything harder than an hb pencil lead (glass , tweezers , etc.) 5.2.5 do not wipe the polarizing plate with a dry cloth , as it may easily scratch the surface of plate. 5.2.6 do not touch the display area with bare hands , this will stain the display area. 5.2.7 do not use ketonics solvent & aromatic solvent. use with a soft cloth soaked with a cleaning naphtha solvent. 5.2.8 to control temperature and time of soldering is 320 10 and 3-5 sec. 5.2.9 to avoid liquid (include organic solvent) stained on lcm . 5.3 storage 5.3.1 store the panel or module in a dark place where the temperature is 25 5 and the humidity is below 65% rh. 5.3.2 do not place the module near organics solvents or corrosive gases. 5.3.3 do not crush , shake , or jolt the module. 5.4 terms of warranty 5.4.1 applicable warrant period the period is within thirteen months since the date of shipping out under normal using and storage conditions. 5.4.2 unaccepted responsibility this product has been manufactured to your company?s specification as a part for use in your company?s general electronic products. it is guaranteed to perform according to delivery specifications. for any other use apart from general electronic equipment , we cannot take responsibility if the product is used in nuclear power control equipment , aerospace equipment , fire and security systems or any other applications in which there is a direct risk to human life and where extremely high levels of reliability are required. free datasheet http:///

▲Up To Search▲

Price & Availability of PC1602LRS-FWA-B-Q

	To Download PC1602LRS-FWA-B-Q Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .